High-pressure hose selection and versatility

Simply speaking, the main factors in choosing the form are system pressure, pressure fluctuations, oil flow rate, temperature, oil and environmental conditions.
High-pressure hoses for hydraulic systems are made of synthetic rubber and reinforced according to the intended load. In contact with the oil is an inner tube made of oil-resistant synthetic rubber. There are several reinforcement layers on the outside of the inner tube. The reinforcement material is made of natural or synthetic fiber yarns, metal wires, or combinations thereof. Reinforcement layers can be both compiled and revolved. The outermost layer is an oil-resistant, weather-resistant skin with an adhesive between the layers.
So what are the commonality of high pressure hose products? Oiled hoses can also pass water, dilute sulfuric acid solution, steam not exceeding 100 degrees Celsius, mud, etc.
The inner rubber red oil-resistant hose can be used up to 130 ° C.
Of course, the use of sandblasting hoses on mud is more appropriate.
There are many more, as long as the role played by the medium is the same, in emergency situations, the hose under the same pressure can be used.

NEXT:The development and growth of high-pressure hose must take the brand benefits

Blog

Application to automobile manufacturing and its domestic history
20-02-12

The petroleum, chemical, coal, steel plant, and automobile manufacturing industries have always been the preferred units for supporting high-pressure h…

Summary of common causes of high pressure hose damage
20-02-24

The common causes of high-pressure hose damage are summarized as follows. I hope that you can better avoid this problem through our introduction. Lets …

We are essential for rubber tube inspection standards
20-03-02

Rubber pipe refers to the pipe used for gas transportation. It is often used for gas welding, gas cutting, various gas shielded welding, plasma arc wel…

How to avoid high pressure hose failure?
20-02-17

As liquid transmission pipelines, high-pressure hoses may malfunction when used. If we encounter such a situation, what should we do? I will tell you a…

Hot Products

.

Steel Wire High Pressure Rubber Din 4Sh 4Sp Hydraulic Hose Factory Wholesale

EN 856 4SH steel wire spiraled hydraulic hose is suitable for extremely high pressure conditions due to its four layers of steel wire reinforcement.

.

Non-Conductive Furnace Door Hose

The non-conductive furnace door hose is designed for conveying cooling water to furnace doors in steel mills, glass plants...

.

Drain Down Hose

The Drain Down hose is High quality, no-kink natural rubber hose. Ideal for dry and clean draining of heating systems before repair or maintenance.

Related Keywords

r4 hoser14 hosewasher hosestwin hosedischarge hoserock drill hosepump hoseoxygen hosechemical resistant hose16711 Swaged Hydraulic Hose Fittingsr3 hose3 inch discharge hoser2 hose10411 swaged metric hose fittingspressure hosewashdown hoseslurry hosehydraulic hose fittingsTextile Reinforced Hydraulic Hosemetric hydraulic hose fittings