The common causes of high-pressure hose damage are summarized as follows. I hope that you can better avoid this problem through our introduction. Let's take a closer look at them as follows:

 

Reason one: The outer wire of the steel wire is pulled off and cannot accept the pressure, so that the service life of the metal hose is terminated early. Because the inner bellows, the two receivers and the outer wire mesh require the Trinity to be welded together, it is necessary to ensure the normal operation of the metal hose. If the welder is slightly careless in the overall welding, the trinity welding will be unqualified. Once the device is in operation, the outer net will be pulled off and the vibration cannot be damped. In order to prevent this phenomenon, the product must be tested for airtight water pressure before leaving the factory.

 

Cause two, there is an open welding phenomenon in the gap of the internal bellows, which will also cause the metal hose to be damaged. This is caused by the careless and careless skills of the welder. Because the weld is not strong and dense, the weld is stretched under the effect of the working pressure of the active medium of the hose, which makes the metal hose rise. Leaked appearance.