These details need attention when mixing high pressure hoses

These details need attention when mixing high pressure hoses
 
    The use of high-pressure hoses is becoming more and more widespread, so do you know what problems you need to pay attention to when using high-pressure hoses? Let us ask the professional and technical personnel of high-pressure hose manufacturers to analyze it for us:
    1. Use a kneader to mix the inner, middle and outer layers of the high-pressure hose according to the formula. Use an extruder to extrude the inner tubing and cover it with a soft or hard core coated with a release agent. (The liquid nitrogen freezing method can also be used without a core)
    2. The calender is pressed into a high-pressure rubber tube middle-layer rubber sheet, which is rolled up with a release agent and cut into a specified width according to the process requirements.
    3. Wrap the inner tubing containing the core on the winding machine or braiding machine with copper-plated steel wire or copper-plated steel wire rope. At the same time, the middle-layer rubber sheet is wound around the two layers of copper-plated steel wire or copper-plated steel wire simultaneously , The winding wire is tied at the beginning and end (some early winding machines need to pre-stress the copper-plated steel wire in advance)
    4. Cover the extruder with an outer layer of rubber again, and then wrap the lead or cloth vulcanization protective layer and vulcanize it through a vulcanization tank or a salt bath.
    5. Remove the vulcanization protective layer later, withdraw the tube core, crimp the upper tube joint, and sample the sample for inspection.

NEXT:What should I refer to when choosing a rubber hose?

Blog

We are essential for rubber tube inspection standards
20-03-02

Rubber pipe refers to the pipe used for gas transportation. It is often used for gas welding, gas cutting, various gas shielded welding, plasma arc wel…

Application to automobile manufacturing and its domestic history
20-02-12

The petroleum, chemical, coal, steel plant, and automobile manufacturing industries have always been the preferred units for supporting high-pressure h…

How to avoid high pressure hose failure?
20-02-17

As liquid transmission pipelines, high-pressure hoses may malfunction when used. If we encounter such a situation, what should we do? I will tell you a…

Summary of common causes of high pressure hose damage
20-02-24

The common causes of high-pressure hose damage are summarized as follows. I hope that you can better avoid this problem through our introduction. Lets …

Hot Products

.

Drain Down Hose

The Drain Down hose is High quality, no-kink natural rubber hose. Ideal for dry and clean draining of heating systems before repair or maintenance.

.

Steel Wire High Pressure Rubber Din 4Sh 4Sp Hydraulic Hose Factory Wholesale

EN 856 4SH steel wire spiraled hydraulic hose is suitable for extremely high pressure conditions due to its four layers of steel wire reinforcement.

.

Non-Conductive Furnace Door Hose

The non-conductive furnace door hose is designed for conveying cooling water to furnace doors in steel mills, glass plants...

Related Keywords

chemical resistant rubber hosefuel hosejetter hosefood grade silicone tubing12611A Swaged Hydraulic Hose FittingsTextile Reinforced hosecomposite hose manufacturersMaterial Handling Hosefood grade hose pipe2 inch lay flat hoser3 hosecover hosehigh pressure steam hosepressure hoser7 hoseFloating Marine Oil Hosegrout hosefuel delivery hose3 inch discharge hosesandblasting hose for sale